Product Description
High Stability Perfluorinated Liquid for Nuclear Power
Packaging Methods:
This series of products are packed with 25kg/barrel, or for customer customization.
The fluorinated solvent/liquid series are appearance liquid substances, which
have high dielectric constant and no fire point and flash point feature.
Ideal chemical inertness, this can be widely used in various temperature control heat dissipation occasions.
The most common types of nuclear power plants use water for cooling in two ways:
To convey heat from the reactor core to the steam turbines.
To remove and dump surplus heat from this steam circuit. (In any steam/ Rankine cycle plant
such as present-day coal and nuclear plants there is a loss of about two-thirds of the energy due to
the intrinsic limitations of turning heat into mechanical energy. After the Fluoride Solution appear,
this problem will be solved.
The characteristic of the dielectric coating:
* Ideal Fluorine refrigerant chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;
* The Fluorocarbon cooling medium low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus it ensuring the heating parts can work well and stably;
* It is Non-dangerous goods, non-flammable and non-explosive, no fire point and flash point Fluorocarbon Refrigerant;
* Good electrical insulation Fluorocarbon Refrigerant, extremely high breakdown voltage above 40KV;
* The dielectric constant below 2 doesn`t make data lost in data center applications ;
*The fluorinated cleaning solvent is Good fluidity, this liquid chemical lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;
* This is Nontoxic, harmless, non-irritating;
* Environmentally friendly, have ODP value of 0 and extremely low GWP value
The physicochemical parameter of the products:
|
Parameter
|
TUWF-47
|
TUWF-110
|
TUWF-160
|
|
dielectric constant
|
1.89
|
1.96
|
3.82
|
|
dielectric strength
|
55KV
|
52KV
|
40KV
|
|
surface tension
|
12.2mN/m
|
12.7mN/m
|
1.154mN/m
|
|
boiling point
|
47°C
|
110°©C
|
165°C
|
|
density
|
1.62g/ml
|
1.83g/ml
|
1.63g/ml
|
|
saturated water content
|
40ppm
|
50ppm
|
160ppm
|
|
critical temperature
|
205°C
|
--
|
--
|
|
PH value
|
7
|
7
|
7
|
|
flash point
|
No
|
No
|
No
|
|
fire point
|
No
|
No
|
No
|
|
ODP
|
0
|
0
|
0
|
|
GWP
|
7
|
low
|
low
|
|
specific heat
|
1.26 J/g°C
|
1.41J/g°C
|
1.35 J/g°C
|
|
heat of vaporization
|
121.7 J/g°C
|
136J/g°C
|
--
|
|
viscosity
|
0.55 mPa.s
|
0.87 mPa.s
|
1.24mPa.S
|
|
inhalation toxicity
|
low toxicity
|
low toxicity
|
low toxicity
|
Product use:
This series of products are not only widely used in a variety of temperature-controlled heat
dissipation system, especially suitable for every link of the semiconductor manufacturing; but
also extensively applied to the immersion cooling for computer server system and other cooling
and heat dissipation, such as wind–driven generator and the inside the generator set, the
immersion cooling medium for high-voltage transformer, the cooling system for electric vehicle
battery and Phased Array Radar etc.
Product storage and transportation:
This series of products are easily store and transport.
Contact Now
