Product Description
47 Degree Dielectric Coating for Wind Turbines Generator
Fluorocarbon Cooling medium series are unique Perfluorinated liquid substances, which
have high dielectric constant, ideal chemical inertia, excellent thermal conductivity and good
system compatibility,The fluoride solution can be widely used in cooling system of heating parts inside the wind generator
3M7100 / 7200 replaces electronic refrigerant; 3M series replaces FC-40 refrigerant; Replace 3M3283 high boiling point solvent.
The characteristic of the dielectric coating:
*Refrigerant For Wind Turbines Generator is kind of Ideal chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;
* The low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus ensuring the heating parts can work well and stably;
* Non-dangerous goods, non-flammable and non-explosive, no fire point and flash point;
* Fluoride solution is good electrical insulation, extremely high breakdown voltage above 40KV;
* The dielectric constant below 2 doesn`t make data lost in data center applications ;
* Good fluidity, lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;
* Nontoxic, harmless, non-irritating;
* Environmentally friendly, have ODP value of 0 and extremely low GWP value
The physicochemical parameter of the products:
|
Parameter
|
HYM-47
|
HYM-110
|
HYM-160
|
|
dielectric constant
|
1.89
|
1.96
|
3.82
|
|
dielectric strength
|
55KV
|
52KV
|
40KV
|
|
surface tension
|
12.2mN/m
|
12.7mN/m
|
1.154mN/m
|
|
boiling point
|
47°C
|
110°©C
|
165°C
|
|
density
|
1.62g/ml
|
1.83g/ml
|
1.63g/ml
|
|
saturated water content
|
40ppm
|
50ppm
|
160ppm
|
|
critical temperature
|
205°C
|
--
|
--
|
|
PH value
|
7
|
7
|
7
|
|
flash point
|
No
|
No
|
No
|
|
fire point
|
No
|
No
|
No
|
|
ODP
|
0
|
0
|
0
|
|
GWP
|
7
|
low
|
low
|
|
specific heat
|
1.26 J/g°C
|
1.41J/g°C
|
1.35 J/g°C
|
|
heat of vaporization
|
121.7 J/g°C
|
136J/g°C
|
--
|
|
viscosity
|
0.55 mPa.s
|
0.87 mPa.s
|
1.24mPa.S
|
|
inhalation toxicity
|
low toxicity
|
low toxicity
|
low toxicity
|
Fluorocarbon Refrigerant use:
This series of products are not only widely used in a variety of temperature-controlled heat
dissipation system, especially suitable for every link of the semiconductor manufacturing; but
also extensively applied to the immersion cooling for computer server system and other cooling
and heat dissipation, such as wind–driven generator and the inside the generator set, the
immersion cooling medium for high-voltage transformer, the cooling system for electric vehicle
battery and Phased Array Radar etc.
Fluorocarbon Refrigerant packaging:
This series of products are packed with 25kg/barrel, or for customer customization.
Fluorocarbon Cooling Medium storage and transportation:
This series of products are easily store and transport.
Contact Now
