Product Description
High Stability Perfluorinated Liquid for Gearbox
With the rapid development of automotive technology and stricter environmental regulations, especially the development of hybrid and electric vehicle industry,
higher requirements are put forward for gear manufacturing. In the trend of automobile electrification, reducer is the main noise source of automobile.
Especially, the high speed of motor input, generally in 8000-15000 rpm, some even up to 20000 rpm, brings great challenges to the noise control of gear transmission,
and at the same time produces a lot of heat. How to ensure the life of gear? Fluorocarbon Cooling medium series are Perfluorinated liquid substances, which
have high dielectric constant. Cooling of the heat-generating of the Gearbox Ideal chemical inertness, can be widely used in various temperature control heat dissipation occasions.
The characteristic of the dielectric coating:
*Fluorocarbon Refrigerant have ideal chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;
* Chemical Coating low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus ensuring the heating parts can work well and stably;
* Refrigerant For Gearbox non-dangerous goods, non-flammable and non-explosive, no fire point and flash point;
* Fluorocarbon Refrigerant good electrical insulation, extremely high breakdown voltage above 40KV;
* The dielectric constant below 2 doesn`t make data lost in data center applications ;
* Fluorine Refrigerant good fluidity, lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;
* Fluorinated Solvent nvontoxic, harmless, non-irritating;
* Liquid Fluorocarbon Refrigerant environmentally friendly, have ODP value of 0 and extremely low GWP value
The physicochemical parameter of the products:
|
Parameter
|
HYM-47
|
HYM-110
|
HYM-160
|
|
dielectric constant
|
1.89
|
1.96
|
3.82
|
|
dielectric strength
|
55KV
|
52KV
|
40KV
|
|
surface tension
|
12.2mN/m
|
12.7mN/m
|
1.154mN/m
|
|
boiling point
|
47°C
|
110°©C
|
165°C
|
|
density
|
1.62g/ml
|
1.83g/ml
|
1.63g/ml
|
|
saturated water content
|
40ppm
|
50ppm
|
160ppm
|
|
critical temperature
|
205°C
|
--
|
--
|
|
PH value
|
7
|
7
|
7
|
|
flash point
|
No
|
No
|
No
|
|
fire point
|
No
|
No
|
No
|
|
ODP
|
0
|
0
|
0
|
|
GWP
|
7
|
low
|
low
|
|
specific heat
|
1.26 J/g°C
|
1.41J/g°C
|
1.35 J/g°C
|
|
heat of vaporization
|
121.7 J/g°C
|
136J/g°C
|
--
|
|
viscosity
|
0.55 mPa.s
|
0.87 mPa.s
|
1.24mPa.S
|
|
inhalation toxicity
|
low toxicity
|
low toxicity
|
low toxicity
|
Product use:
This series of products are not only widely used in a variety of temperature-controlled heat
dissipation system, especially suitable for every link of the semiconductor manufacturing; but
also extensively applied to the immersion cooling for computer server system and other cooling
and heat dissipation, such as wind–driven generator and the inside the generator set, the
immersion cooling medium for high-voltage transformer, the cooling system for electric vehicle
battery and Phased Array Radar etc.
Product packaging:
This series of products are packed with 25kg/barrel, or for customer customization.
Product storage and transportation:
This series of products are easily store and transport.
Contact Now
