Product Description
Eco-friendly Dielectric Coating for Wind Turbines Generator
Fluorocarbon Cooling medium, it has good electrical insulation, and a high breakdown voltage, greater than 55KV.
this series are unique Perfluorinated liquid , which have high dielectric constant, 1.62g/ml density
,The fluoride solution can be widely used in cooling system of heating parts inside the wind generator
The characteristic of the Refrigerant For Wind Turbines Generator:
* Good electrical insulation, extremely high breakdown voltage above 40KV;
* Ideal chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;
* The low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus ensuring the heating parts can work well and stably;
* Refrigerant For Wind Turbines Generator is non-dangerous goods, non-flammable and non-explosive, no fire point and flash point;
* The dielectric constant below 2 doesn`t make data lost in data center applications ;
* Good fluidity, lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;
* Fluoride Solution is Nontoxic, harmless, non-irritating;
* Environmentally friendly, have ODP value of 0 and extremely low GWP value
The physicochemical parameter of the Fluorocarbon Refrigerant:
|
Parameter
|
TUWF-47
|
TUWF-110
|
TUWF-160
|
|
dielectric constant
|
1.89
|
1.96
|
3.82
|
|
dielectric strength
|
55KV
|
52KV
|
40KV
|
|
surface tension
|
12.2mN/m
|
12.7mN/m
|
1.154mN/m
|
|
boiling point
|
47°C
|
110°©C
|
165°C
|
|
density
|
1.62g/ml
|
1.83g/ml
|
1.63g/ml
|
|
saturated water content
|
40ppm
|
50ppm
|
160ppm
|
|
critical temperature
|
205°C
|
--
|
--
|
|
PH value
|
7
|
7
|
7
|
|
flash point
|
No
|
No
|
No
|
|
fire point
|
No
|
No
|
No
|
|
ODP
|
0
|
0
|
0
|
|
GWP
|
7
|
low
|
low
|
|
specific heat
|
1.26 J/g°C
|
1.41J/g°C
|
1.35 J/g°C
|
|
heat of vaporization
|
121.7 J/g°C
|
136J/g°C
|
--
|
|
viscosity
|
0.55 mPa.s
|
0.87 mPa.s
|
1.24mPa.S
|
|
inhalation toxicity
|
low toxicity
|
low toxicity
|
low toxicity
|
Fluorocarbon Cooling Medium use:
This series of products are not only widely used in a variety of temperature-controlled heat
dissipation system, especially suitable for every link of the semiconductor manufacturing; but
also extensively applied to the immersion cooling for computer server system and other cooling
and heat dissipation, such as wind–driven generator and the inside the generator set, the
immersion cooling medium for high-voltage transformer, the cooling system for electric vehicle
battery and Phased Array Radar etc.
Product packaging:
This series of products are packed with 25kg/barrel, or for customer customization.
Product storage and transportation:
This series of products are easily store and transport.
Contact Now
